Q B N

; Installs Windows to the first available partition that has the space and doesn't already contain an version of Windows
AutoPartition=1
; Informs the Windows Setup Loader that an unattended Setup is running directly from the Windows product CD
MsDosInitiated="0"
; Informs the Windows Setup Loader that an unattended Setup is running directly from the Windows product CD
UnattendedInstall="Yes"

; Defines the unattended mode to use during GUI-mode Setup (DefaultHide | FullUnattended | GuiAttended | ProvideDefault | ReadOnly)
UnattendMode = FullUnattended
; Specifies whether the end user must accept the End-User License Agreement (EULA) included with Windows (Yes | No)
OemSkipEula = Yes
; Specifies whether Setup installs its files from distribution folders.
OemPreinstall = Yes
; Specifies the path to one or more folders that contain PnP drivers not in Drivers.cab, Redundant thanks to Bashrat
OemPnPDriversPath =
; Determines the installation folder in which you install Windows.
TargetPath = \Windows
; Specifies how to process unsigned drivers during unattended Setup (Block | Warn | Ignore)
DriverSigningPolicy = Ignore
; Specifies whether to connect to the Windows Update site to download updates during Setup
DUDisable = Yes
; Specifies whether to stop the Windows Update process when an error is detected
DUStopOnError = No
; If Set extends disk partition to end of disk or by x MB
ExtendOemPartition = 1
; Specify wheter to leave filesystem alone or convert to NTFS
FileSystem = ConvertNTFS
; Determines if Windows should auto activate over Internet
AutoActivate = No
; Proxy Setting to use when auto activating windows
ActivateProxy = Proxy
; 3=small memory dump 0-3
CrashDumpSetting = 3
; Don't go get updates from Internet during install
DisableDynamicUpdates = Yes
; Yes=Enables hibernation, No=Disabled hibernation
Hibernation = Yes
; Yes=Wait 15seconds after guimode setup to reboot
WaitForReboot = No
; Defines Custom HAL type
ComputerType =
; Used in conjuction with OPK If yes will not delete Sysprep directory
Factory = Yes
; Used in upgrades to keep previous hal
ForceHalDetection = No
; Allows specification of keyboard type
Keyboardlayout =
; Indicates whether or not this is an OS upgrade
NTUpgrade = No
; Indicates whether OEM files should be overwritten
OverwriteOEMFilesOnUpgrade = 0
; Only when booting to CD specify 1 to repartition hard disk
Repartition = 1
; Set to yes during winnt installation to skip welcome
UnattendSwitch = No
; Indicats if this is an upgrade and to use [Win9xUpg] section
Win9xUpgrade = No

; This section has settings to allow an upgraded system to be uninstalled

; Commands to execute the first time an end user logs on to the computer after GUI-mode Setup completes
"C:\local\buildgui.bat"

; Licensing Mode usually perseat
AutoMode=PerSeat
; When in PerServer mode=number of licenses
AutoUsers=50

; IF this section is used the Winnt32.exe /copysource:lang setting must be specified
; Specifies the Inputlocal and keyboard setting for default user
InputLocale_DefaultUser=
; Locale ID for default User
UserLocale_DefaultUser=
; Locale\Keyboard combinations to be installed
InputLocale=
; Lanugage locale to be installed
Language=
; Language Group to be installed
LanguageGroup=
; System Locale to be specified
SystemLocale=
; User Locale setting
UserLocale=

; Used with Detached programs to provide arguments
Arguments=
; Indicates Regional info GUI to be skipped in setup
OEMSkipRegional=1
; For OEMs allows use of hashpwd.exe cannot be used with autologon
EncryptedAdminPassword=No
; Sets Timezone 010=Mountain
TimeZone="010"
; Used to skip welcome screens in GUI setup
OemSkipWelcome=1
; Allows to change default location of profiles
ProfilesDir=""
; Indicates that system should autologon after reboot
AutoLogon="Yes"
; Number of times to auto logon
AutoLogonCount=2
; Specifies programs to run concurrently with Setup
DetachedProgram=""
; Sets the admin password
AdminPassword=local

; Specifies the name of the workgroup in which the computer participates.
JoinWorkgroup=WORKGROUP
;
CreateComputerAccountInDomain=Yes
; Specifies the name of the domain in which the computer participates
JoinDomain="CONTOSO"
; Specifies the full Lightweight Directory Access Protocol (LDAP) path name of the organizational unit (OU) in which the computer belongs
MachineObjectOU= "OU=Workstations, dc=contoso, dc=com"
; Specifies the name of the user account in the domain that has permission to create a computer account in that domain
DomainAdmin="Contoso\Administrator"
; Specifies the password of the user account as defined by the DomainAdmin entry.
DomainAdminPassword="password"

; Sets the computername, * = random by install
ComputerName=*
; Sets the Registered Users name
FullName="Full Name"
; Sets the Registered Organisation
OrgName="Organization Name"
; We all know what this is
ProductKey="XXXXX-YYYYY-ZZZZZ-AAAAA-BBBBB"

; Number of colors in display
BitsPerPel=16
; X resolution typically 1024
Xresolution=1024
; Y resolution typically 768
YResolution=768
; Vertical refresh rate
Vrefresh=60

; Used when custom disk drivers must be specified
; Enter the description name =Retail or OEM

; This section is used to specify custom HALs, and also maps to the Mass Storage Device section

; Used by RIS Clients Only

; This section has no entries but is required to install networking in unattended installations

; Installs TCP/IP
MS_TCPIP=params.MS_TCPIP
; Installs IPX
MS_TCPIP=params.MS_NWIPX
; Installs PPTP
MS_TCPIP=params.MS_PPTP
; Installs L2TP
MS_TCPIP=params.MS_L2TP
; Installs AppleTalk
MS_TCPIP=params.MS_AppleTalk
; Installs Network Monitor
MS_TCPIP=params.MS_NetMon
; Installs ATM Lane Emulation
MS_TCPIP=params.MS_ATMLANE
; Installs ATM Call Manager
MS_TCPIP=params.MS_ATMUNI
; Installs ATM ARP Server
MS_TCPIP=params.MS_ATMArps

; Indicates MS Client Should be installed and configured
MS_MSClient=params.MS_MSClient
; Indicates NetWare Client Should be installed and configured
MS_NWClient=params.NW_Client

; Install File and Print Services
MS_SERVER=params.MS_SERVER
; Install Dial up Server
MS_RasSrv=params.MS_RasSrv
; Install QOS Packet Scheduler
MS_PSched=params.MS_PSched
; Install SAP Agent
MS_NwSapAgent=params.NwSapAgent
; Install Network Load Balance
MS_WLBS=params.WLBS

; For SERVER only. list of domains that can be browsed
BrowseDomains=corp, sales, research
; Name Service Provider address (NCACN)
NameServiceNetworkAddress=10.10.1.1
; Specifies name service protocol (IP vs Pipes)
NameServiceProtocol=ncacn_ip_tcp

; Server only - Broadcast for LANMAN 2.0
BroadcastsToLanman2Clients=No
; Server only - Memory Optimization Setting
Optimization=MaxThroughputForFileSharing

; Specifies information for Network Load balancing

; Entries in this section are applied to all NICs
; RRAS boxes only - dead gateway detection
DeadGWDetectDefault=NO
; If Yes A and PTR records are not auto registered in DNS
DisableDynamicUpdate=No
; Sets the Primary DNS Suffix for the computer
DNSDomain=Foo.com
; DNS Suffix Search Order
DNSSuffixSearchOrder=Srv1.foo.com,srv2.foo.com
; RRAS only. Yes=Use the default gateway
DontAddDefaultGatewayDefault=Yes
; Used with Disable Dynamic Update to register with DNS
EnableAdapterDomainNameRegistration=Yes
; RRAS Only Wheter or not to use ICMP redirects
EnableICMPRedirect=No
; Specifies whether or not to use LMHosts
EnableLMHosts=No
; Enables TCP/IP Filtering
EnableSecurity=No
; Species NetBIOS scope
ScopeID=Foo
; Changes the Primary DNS Suffix to match the AD Domain name
SyncDomainWithMembership=1
; Enables devolution when an unqualified DNS query is sent
UseDomainNameDevolution=Yes
; Specifies the sub heading for config specific to the adapter
AdapterSections=params.MS_TCPIP.Adapter1

;Allows to enable, disable and demote specific bindings on specific NICs
;Often Used with NLB to set which NICs are NLB enabled

; One entry per adapter used to identify NIC for specific settings
Adapter1=params.Adapter1

; Specifies a name for this connection
ConnectionName="Corporate Network"
; Adapters P&P ID. If * means match to first card found
INFID=*
; Bus Number of PCI NIC
PCIBusNumber=0
; Device Number of PCI NIC
PCIDeviceNumber=11
; Function Number of PCI NIC
PCIFunctionNumber=0
; DMA Channel Number for NIC
DMA=1
; Non P&P cards that setup can ignore and not install
DoNotDetectLegacyCards = *PNP030b,*PNP8132
; IO Adddress of NiC
IOAddr=330
; IRQ of Card
IRQ = 5
; Memory address of Card
MEM=0xc123456
; MAC address of NIC
NetCardAddress=0x123456789AB

; Maps to the NetADapters Section identies adapter specific settings
SpecificTo=Adapter1
; Default Gateway addresses for this adapter
DefaultGateway=10.10.1.1,10.10.1.2
; Whether or not this adapter uses DHCP address
DHCP=Yes
; DHCP Class ID
DHCPClassID=foo
; DNS Suffix for this adapter
DNSDomain=Foo.com
; Order of DNS Servers to use for this adapter
DNSServerSearchOrder=10.10.1.21,10.10.1.22
; IP addresses for this adapter
IPAddress=10.10.1.24
; 0=From DHCP, 1=Enable NetBIOS, 2=DisableNetBIOS
NetBIOSOptions=1
; Network Mask, 1 per each IP address specified
SubnetMask=255.0.0.0
; Whether or not to register with WINS
WINS=No
; List of WINS Servers. Wins=Yes must be set
WinsServerList=10.10.1.21,10.10.1.22

; This section is used to configure error reporting, remote assistance and Help and support center
; Specifies if error reporting is enabled\displayed
ER_Display_UI = 1
; Specifies which applications to report errors on All, Listed, None
ER_Enabled_Applications = All
; Determines if Kernel errors are reported
ER_Enable_Kernel_Errors = 1
; Determines if Errors are reported
ER_Enable_Reporting = 1
; Determines if errors are reported for Windows Applications
ER_Enable_Windows_Components = 1
; Specifies which applications not to report errors on
ER_Exclude_Exe1=Notepad
; Specifies which applications not to report errors on
ER_Exclude_Exe2=Notepad
; Which applications to include when applications mode=listed
ER_Include_Exe1=Notepad
; Which applications to include when applications mode=listed
ER_Include_Exe2=Notepad
; force queue mode
ER_Force_Queue_mode = 0
; Determines if Errors in MSApps are reported
ER_Include_MSApps = 1
; Allows remote person to take full control when allowed
RA_AllowFullControl = 1
; Defines if Remote assistance is enabled
RA_AllowToGetHelp = 1
; Defines if someone with permissions can create a session
RA_AllowUnsolicited = 1
; Number of seconds until the remote assistance ticket expires. Default 30 days
RA_MaxTicketExpiry=

; Area Code for modem
AreaCode=303
; Country code for modem 1=USA
CountryCode=1
; Indicates tone or pulse dialing for modem
Dialing=Tone
; Specifies number to dial for outside line
LongDistanceACcess=9

; Enables Remote Desktop
AllowConnections=1
; Sets terminal services licensing Mode
LicensingMode=PerSeat
; 1 sets TS permissions same as NT 4.0. 0 sets them to Win2000
PermissionsSetting=0

; QoS Admission Control Service
ACS = 0
; DHCP Server
DHCPServer = 0
; DNS Server
DNS = 0
; Directory Service Migration Tool
DSMIGRAT = 0
; Internet Authentication Services
IAS = 0
; Internet Location Service
ILS = 0
; TCP/IP Print Server
LPDSVC = 0
; Print Services for Macintosh
MacPrint = 0
; Services for Macintosh
MacSrv = 0
; Installs Connection Manager Admin Kit
Netcm = 0
; Network Monitor tools
NETMONTOOLS = 0
; Simple TCP/IP Services
SimpTcp = 0
; Simple Network Management Protocol
SNMP = 0
; Windows Internet Name Service WINS = 0

; Defines community names and rights
Accept_CommunityName = Dude:Read_WRITE
; Determines if packets are allowed from any host
Any_Host = Yes
; Sets the community name
Community_Name = ""
; Defines a contact name for this machine
Contact_Name = "mattmi@dude.com"
; Defines specific hosts to allow packets from Max=3
Limit_Host = ""
; Defines a physical location for this machine
Location = "here"
; Determines if an Authentication trap is sent
Send_Authentication = Yes
; determines types of services to report
Service = Physical,Applications,Datalink,Internet,End-to-End
; management stations to send traps to
Traps =

; accessibility wizard
AccessOpt = on
; calculator
Calc = on
; certificate services compontents of the certificate server
CertSrv = off
; web client components of the certificate server
CertSrv_Client = off
; server components of the certificate server
CertSrv_Server = off
; enables insertion of symbols and characters into documents
CharMap = off
; chat client
Chat = on
; clipboard viewer
Clipbook = on
; COM+ network access
Complusnetwork = off ; desktop wallpaper
DeskPaper = on
; phone dialer
Dialer = on
; DTC network access
Dtcnetwork = off
; Fax components
Fax = on
; Front Pager Extensions
fp_extensions = off
; Visual Interdev RAD remote deployment
fp_vdir_deploy = off
; freecell game
freecell = off
; hearts game
hearts = off
; hyperterm
hypertrm = on
; installs visible entry points (shortcuts) for IE
IEAccess = on
; harden IE for administrators, power users
IEHardenAdmin = off
; harden IE for users
IEHardenUser = off
; common set of files needed by internet information services
Iis_Common = off
; ftp service
Iis_Ftp = off
; html based administration tools for iis
Iis_Htmla = off
; microsoft management console based administration tools for iis
Iis_Inetmgr = off
; NNTP server.
iis_nntp = off
; NNTP server docs.
iis_nntp_docs = off
; personal web manager, valid only for w2k professional
iis_pwmgr = off
; SMTP server.
iis_smtp = off
; SMTP server docs.
iis_smtp_docs = off
; www service
iis_www = off
; Web printing components
iis_www_vdir_printers = off
; Installs terminal Services Active X control into the virtual directory
iis_www_vdir_terminalService = off
; script debugger
IisDbg = on
; indexing services, requires iis_common, iis_inetmgr, iis_www and com = on
indexsrv_system = off
; internet printing, requires iis_common, iis_inetmgr, and iis_www
inetprint = off
; Disable Terminal Services licensing.
LicenseServer = off
; Sample Sounds
media_clips = on
; utopia sound scheme
Media_Utopia = on
; Minsweeper
minesweeper = off
; mouse pointers
mousepoint = off
; Windows media player
Mplay = on
; Integrates MSMQ into AD
msmq_ADIntegrated = off
; MSMQ core components
msmq_Core = off
; Enables MSMQ to use HTTP
msmq_HTTPSupport = off
; Allows messages to be stored locally
msmq_LocalStorage = off
; Provides AD and site recognition
msmq_MQDSService = off
; Provides MSMQ routing
msmq_RoutingSupport = off
; associates message arrival with com objects
msmq_TriggerService = off
; Installs MSN Explorer
msnexplr = off
; Word Pad
MsWordPad = on
; microsoft com internet services, requires iis_common, iis_inetmgr, iis_www and com = on
NetCis = off
; additional optional networking components, requires [NetOptionalComponents] section
NetOc = on
; object packager
ObjectPkg = off
; hide Outlook Express icons
OEAccess = off
; MS Paint
Paint = on
; Pinball
pinball = off
; sound recorder
rec = on
; remote installation services
reminst = off
; OCM update root certificates
rootautoupdate = on
; remote storage services enable the use of tape libraries as extensions of ntfs volumes
RStorage = off
; Solitaire game
solitaire = off
; spider game
spider = off
; document templates
Templates = on
; Installs Terminal Services on SERVERs only
TerminalServer = off
; if TsEnable = On then tsClient files for creating client disks, appx 10MB
TsClients = off
; Installs the ActiveX component for terminal services. requires IIS
TsWebClient = off
; volume control
vol = on
; show Windows Messenger shortcuts
wmaccess = on
; show Windows Media Player shortcuts
wmPOCM = on
; windows media technologies components
Wms = off
; windows media technologies server administration tools web components
Wms_Admin_asp = off
; Windows Media MMC snap in
wms_admin_mmc=off
; windows media technologies server, requires Wms_Admin
Wms_Server = off
; Installs MS Game Zone internet games
zonegames = off

; Specifies the Internet Protocol (IP) address or Uniform Resource Locator (URL) of the File Transfer Protocol (FTP) proxy server on the network.
FTP_Proxy_Server="Http://Myproxy:80"
; Specifies the IP address or URL of the Gopher proxy server on the network
Gopher_Proxy_Server="Http://Myproxy:80"
; Specifies the IP address or URL of the HTTP proxy server on the network
HTTP_Proxy_Server="Http://Myproxy:80"
; Specifies whether to use a proxy server to connect to the Internet
Proxy_Enable=1
; Specifies a semicolon-separated list of IP addresses to bypass the proxy server Proxy_Override=
; Specifies the IP address or URL of the Secure proxy on the network
Secure_Proxy_Server="Http://Myproxy:80"
; Specifies the IP address or URL of the Socks proxy on the network
Socks_Proxy_Server="Http://Myproxy:80"
; Specifies whether to use the same proxy server for all protocols.
Use_Same_Proxy=1

; 1 indicates browser to be configured from a server
AutoConfig=0
; URL for Javascript file that configures proxy settings
AutoConfigJSURL=http://
; URL for an INS file that configures proxy settings
AutoConfigURL=Http://
; URL for help page
Help_Page=Http://
; Set the default homepage
Home_Page = http://www.Microsoft.com
; Name fo quick link 1
Quick_Link_1_Name="Foo Page"
; URL of quick link 1
Quick_Link_1="http:"

; Tells IE to accept entries during unattended install
BrandIEUsingUnattended = Yes
; IE to use the specified IEAK branding file in $OEM$
IEBrandingFile=IEAK.INS

; URL Name for first Favorite (BrandingIEUSingUnattended must =Yes)
Title1="MSDN.url"
; URL matching first favorite name
URL1="http://MSDN.Microsoft.com"
; URL Name for 2nd Favorite (BrandingIEUSingUnattended must =Yes)
Title2="Support.url"
; URL matching 2nd favorite name
URL2="http://support.Microsoft.com"

LocalIntranetSites=http://www.contoso.com;http://local.contoso.com
TrustedSites=http://www.microsoft.com

; Add to allowed sites in Internet Explorer
AllowedSites=http://www.contoso.com;http://www.microsoft.com
; Block popups in Internet Explorer
BlockPopups = yes
; Set the filter level for Internet Explorer
FilterLevel = Medium
; Show the information bar when popups have been blocked
ShowInformationBar = Yes

; A bunch more Fax entries are availabe see documentation
; Saves inbound faxes
ArchiveIncoming=True
; Location to save inbound fax
ArchiveIncomingFolderName=
; Saves outbound faxes
ArchiveOutgoing=True
; Location to save outbound fax
ArchiveOutgoingFolderName=
; Called Subscriber ID transmitted during faxes
Csid=Fax

; No = use XP start panel, Yes= Use classic windows with icons on desktop
DefaultStartPanelOff = no
; No means use XP Themes Yes means us Windows Classic themes
DefaultThemeseOff = no
; Used to specify a different default theme. Use to set Screen Saver and wallpaper
CustomDefaultThemeFile=c:\windows\Resources\Themes\Mytheme.theme

; specify the name from netadapters where you want this enabled
InternetConnectionFirewall=Adapter1

; Can contain information for client side certificatses

; Can contain information on configuring Certificate Services on server

; Path for FTP
PathFTPRoot="C:\Inetpub\FTPRoot"
; Path for WWW
PAthWWWRoot="C:\Inetpub\WWWRoot"

; This section for RIS installs only
; Delete all partitions and reformat with NTFS
Repartition=Yes
; Extends volume to whole drive
UseWholeDisk=Yes

; Location of folder used by Windows File Protection
SFCDllCacheDir=
; Display progress meter during scans
SFCShowProgress=1
; Size of DLL Cache
SFCQuota=

; Number of days for Auto System Checkpoints or restore points created
CheckpointCalendarFrequency = 1
; Number of hours after which checkpoint is created
CheckpointSessionFrequency = 10
; Max % of hard disk to user for system restore data store
MaximumDataStorePercentOfDisk = 12
; Max Age in days before a restore point is purged from database
RestorePointLife=30

; This section can contain entries related to upgrading from Win9x